Attention To Detail Is Essential For Keeping A Commercial Kitchen Clean And Safe

Keeping a commercial kitchen or food processing unit safe, clean and functioning efficiently provides a lengthy checklist of items requiring regular attention when managing the safety and efficiency of a commercial kitchen or food processing unit.

Broadly they fall into two categories, attention to food hygiene to ensure there is no contamination and secondly to the health and safety of those working in or visiting the establishment.

Both depend on good working practices, on regular maintenance and on keeping equipment and the kitchen environment completely clean, germ free and safe.

Maintenance covers everything from regular checking of cookers and refrigerators to ensure they are working properly and at the correct temperatures, to keeping any air ducts, filters and extraction systems free of dust and debris build-up, to make sure that they do not harbour any bacteria, are not a fire hazard and also that they are not using more energy than is necessary and adding to operating costs.

Most often ductwork above cookers is the location for the start of kitchen fires and therefore regular inspection and maintenance are generally required by insurers.

There are other potential hazards for people working in commercial kitchens because it is in the nature of the work that it is generally carried out under pressure and because cooking hot food generates quantities of steam, often with oil and food particles dissolved in it.

Steam settling on surfaces will make them slippery and the chief cause of kitchen accidents is slips and trips, sometimes with serious consequences. This makes careful choice of materials for flooring essential as well as prompt repair and maintenance of any damage.

Generally commercial catering establishments have a robust risk assessment, cleaning and health and safety policy to prevent potential accidents but even where these are in place and followed it is inevitable that over time there will be a build-up of dirt in out of the way or hard to reach places.

As part of its regular maintenance and cleaning regime, therefore, regular kitchen deep cleaning may be necessary.

Commercial kitchen cleaning services are well equipped to deliver this thorough type of kitchen cleaning with minimal disruption to the work flow of the kitchen.

Professional cleaning companies have trained staff, specialised equipment and cleaning materials appropriate for use in an environment where food is prepared and their methodology uses a “top down” approach, which will make sure that every surface, corner, nook and cranny of the kitchen receives thorough attention.

How often this type of commercial kitchen cleaning will be needed will be determined partly by the type of food that is cooked and the pattern of work in the kitchen. It may be only be needed once a year, but the cleaning company will provide an assessment so that kitchen managers can schedule what is needed not only to keep the budget under control but also to reduce the risk of costly accidents and ensure a safe, clean working environment.

Copyright (c) 2012 Alison Withers

Brushed Nickel Lighting And Brushed Nickel Kitchen Faucets Will Make Your Kitchen Look Modern!

Brushed nickel finish can often be referred to as satin nickel finish. Its overall look is duller than various other finishes. It doesn’t reflect light as very well. Several new home contractors have commenced selecting brushed nickel for their finish since it will go nicely with many various styles: modern, classic, and contemporary. The style look much like brushed steel. Brushed Nickel Lighting and Brushed Nickel Kitchen Faucets are popular choices for today’s kitchen.

Brushed Nickel Lighting and Brushed Nickel Faucets are not only for your kitchen but are very popular for the bathrooms also. You can get more information on Brushed Nickel Lighting and Brushed Nickel Bathroom Light by clicking on the links at the bottom of this article.

Brushed nickel kitchen faucets have several advantages over stainless steel and chrome. They shine less as well as their color tone has a smaller amount blue in it. This helps so that fingerprints, streaks, and unsightly stains don’t be visible on the faucets as easily. It’s not necessary to regularly clean them and the look of them remains the same.

Numerous companies have several designs to select from. Make certain you obtain one in your cost bracket that will go well to match up your kitchen theme and design. The style functions well many different themes therefore do not be satisfied with only the new modern style if you love more classic styles.

You’ll be able to select faucets with single or dual lever handles. The double lever handles permit you to change the temperature to your preference easier because there are individual controls for cold and hot water. The individual lever is really a multi-tasker’s handle of choice. Because you only need one free hand to regulate water temperature while the other one can be working on other things. Additionally, you are able to pick between soap dispensers and water sprayers.

Prices vary however, if you check around you will discover one to match your budget. Brushed nickel kitchen faucets are usually quite simple to clean because they have already been electroplated to brass.

You can find all several types of brand names for brushed nickel faucets to make certain you discover one in your budget range which has an established history of longevity. The best place to start your search for Brushed Nickel Kitchen Faucets and Brushed Nickel Lighting is on the Internet. You will find many websites with all of the different styles to help you get your kitchen looking modern!

Seattle Data Centers Energy Efficiency Best Practices

This article will provide a brief overview of the United States Department of Energy’s Best Practices Guide for Energy Efficient Data Centers in Seattle. It will highlight best practices in the categories of Information Technology systems, air management, electrical and cooling systems and other opportunities for energy efficient design of data centers in Seattle.

According to the U.S. Department of Energy, data centers in Seattle can consume up to 200 times as much electricity as standard office spaces. Because data centers in Seattle consume so much energy, they are prime targets for energy-efficiency that can reduce electricity and ultimately save money. However, data centers often house mission-critical applications and reliability and high power density capacity are far more important than energy efficiency.

The U.S. Department of Energy created their best practice guide to provide energy efficient alternatives to inefficient data centers in Seattle.

Information Technology Systems in Seattle Data Centers
A typical data center has a highly efficient cooling system and IT equipment can account for more than half of the data center facility’s energy use. If data centers implement efficient IT equipment, then they will reduce these loads which will ultimately reduce the equipment needed to cool them.

Purchasing servers equipped with fans, energy-efficient processors, and power supplies, consolidating storage devices, high-efficient network equipment, consolidating power supplies, and implementing virtualization are the best ways for data centers in Seattle to reduce IT equipment loads.

Air Management
Air management for data centers in Seattle entails all of the designs and configurations required to minimize or eliminate mixing between the hot air rejected from the data center equipment and the cool air supplied to this equipment. Effective air management implementation reduces the bypass of cooling air and the recirculation of heat exhaust. A properly designed air management system can reduce first cost equipment investment, operating costs, increase the facility’s power density, as well as reduce heat related processing failures and interruptions. Key design issues include configuring of the equipment heat exhaust ports and air intake, the location of supply and returns, the temperature set points of the airflow, and the large-scale airflow patterns of the facility.

Electrical Systems
It is important to always consider initial and future electrical system loads, specifically part-and low load conditions when selecting and designing equipment for an electrical system in a data center.

Cooling Systems
Similar to electrical systems, it is important to always consider initial and future cooling systems in data centers in Seattle. Specifically focusing on part-and low-load conditions, as the need for digital data continues to expand.

Additional Opportunities for Energy Efficient Design
There are a number of additional best practices for energy efficient design in data centers in Seattle. According to the U.S. Department of energy the most effective of these practices include on-site power generation, co-generation plants, reduction of standby loss and the use of waste heat, which can be used directly by the facility or to supply cooling required by the data center.

Textured Laminate Flooring And Embossed In Register Laminate Flooring

Sunspeed Flooring Co.,Ltd.,as one of the best laminate flooring suppliers and manufacturers in laminate flooring industry in China, can supply you laminate flooring with a difference,focusing on providing the most hard-working customer service in our industry.

As you know, Sunspeed has been in laminate flooring industry about 13 years, and we always pay more attention to product development, through our mutual efforts, now we can produce laminate flooring in more than ten different surface types, like texture,crystal, wood grain,embossed ,gloss, hand scraped and so on, I will introduce two classical surface types (textured and embossed in register ) for you in the following.

textured laminate flooring , as one of the most classical and popular products in Sunspeed, realizes the dreams of clients to pay less and obtain something uncannily close to real wood flooring.In other words, you can say that textured laminate flooring is an important breakthrough in laminate flooring industry.

Moreover the manufacturer process of textured laminate flooring is that making the flooring surfaces stand out the natural texture of real wood through special machine treatment, just because this reason, more and more clients tend to choose textured laminate flooring as their first choice when home decoration, making their warm home natural and modern feelings.

With the higher requirements for home decoration, textured laminate flooring becomes more and more popular in recent years, and enjoys a very good reputation all over the whole world.

Moreover, about embossed in register laminate flooring , embossed in register laminate flooring, as one kind of our high-end products, only can be matched with 12mm thickness laminate flooring, because only 12mm thickness can stands out its unique and noble.

Frankly speaking, embossed in register laminate flooring has a short history in the market of China, or you can say that it is really a very new product in Chinese laminate flooring industry, just because its specificity, it is becoming more and more popular in the world and the marketing account share is increasing year by year.

On the other hand, embossed in register laminate flooring looks like more similar with engineered wood flooring and solid wood flooring,while the price of embossed in register laminate flooring is much cheaper than wood flooring, it can built the same feeling of real wood flooring only need little money, so we have to say it a kind of product high cost performance.
Sunspeed flooring always pay more attention to quality control and cost control, the target of Sunspeed is our clients can get the best laminate flooring while in the least price.
Please kindly believe us,Sunspeed is sure your true choice, I am sure you will amazing with our product quality, our price and our before-sale and after-sale service.

Sunspeed is waiting for you to open a bright door!

We proudly offer the widest range of hardwood flooring in Calgary

Hardwood Flooring

Hattons Hardwood Flooring provides complete hardwood flooring services to Calgary . We specialize in dustless hardwood floors and hardwood wood flooring . >

We offer proficient assistance for your entire floor covering needs, including hardwood and ceramic tiles . We specialize in the sale and installation of Hardwood, Laminate, Ceramic, Vinyl, and Carpet Floor coverings. We also provide sanding and refinishing services for existing hardwood floors .

Hardwood floors are timeless. While many other floor coverings can become obsolete over time, hardwood’s beauty is superior with age and typically increases the value of a home. What’s more, hardwood flooring is more long-lasting than most other floor coverings. Today’s technology and nearly immeasurable choices of stains, finishes, styles and designs make hardwood flooring one of the most realistic, simple and flexible floor coverings available. Hardwood Flooring Calgary

Hattons Hardwood Floors is a leading flooring stores for full-service hardwood flooring in Calgary , specializing in high-quality wood flooring products and reputable brand names. We proudly offer the widest range of hardwood flooring in Calgary , and with a quarter century in the Calgary hardwood flooring business we are very well versed in all facets of the industry. This includes the entire range of hardwood floor applications and products as well as installation, cleaning and maintenance techniques. Wood Flooring Calgary

For nearly 13 years we have been supplying and installing quality wood flooring in Calgary area.

Hattons Hardwood Floors is a collection of finely crafted engineered and solid wood floors. We specialize in quality products with a fashion focus that meet the changing requirements of designers and consumers.

Invisible Roofing Insulation Shows Visible Results on Energy Bills!

Due to the country-wide economic circumstances that are being felt by nearly every household, people have become very careful in their spending habits especially in the area of home renovations. Everyone is attempting to find ways to save money including in home improvements.

A good way to save money is to make sure the house is energy-efficient. One way to be sure of this is to improve heating and cooling loss through the attic/roofing area. It is important that a homeowner be informed about the need to properly insulate the housetop of a building before making any choices. Following is some information about roofing insulation and how to make the best selection in this area.

Reducing Heating/Cooling Costs

This barrier that is installed in an attic actually is a silent way of contributing to comfort inside any building. It helps maximize the amount of heating and cooling that must be provided to maintain an appropriate interior temperature; it will reduce a significant amount of the overall electricity and/or gas bill. How beneficial is it to save up to 13 percent on winter power costs and save even more on the summer power costs! It is a proven fact that the proper installation of energy efficient insulation under a roof has an amazing immediate effect on energy bills.

When renovating or remodeling, many homeowners focus their entire budget on visible items such as carpets, fixtures, etc. As important as aesthetics are, some of that budget should be diverted to unseen items that again can increase the energy-efficiency of the entire building; effective roof insulation is one of those items. Of course, this will not have visible results and add to the “wow factor” of the house. Since it does increase the comfort level, energy efficiency, and reduction of outside noise, it should make it a more-than-adequate reason to be a significant priority of the entire budget.

Purchasing the Best Type of Insulation

Purchasing only the best type of roofing insulation will result in greater energy efficiency. The material selected is usually laid between the support rafters underneath the plywood sheathing. There are two common types from which to select: traditional fiberglass and foam. Foam seems to be gaining popularity in the market today.

The foam board version is stapled to the sheathing. Right on top of the foam board, the roofing materials are laid and installed. When installing the fiberglass type, workers should wear masks, hand gloves and long-sleeved shirts for safety precautions. This prevents small glass fibers from getting inhaled into the lungs or getting onto the skin, causing allergic reactions or other health problems.

Foam can also be blown-in or sprayed into the same attic area and is a great option when space to install rolled sheet versions is minimal.

Fiberglass insulation comes in the form of rolls or batts. In addition to the fiberglass versions, there are also: mineral/rock and wool; fibers from plastic; and fibers from natural sources such as wool and cotton versions available in rolls.

The lack of roofing insulation or poor installation of the selected material can cause a house to be drafty and cold or alternatively very warm. The workload of the heating system or furnace is increased in order to maintain the desired room temperature during winter; it is similar circumstances with the air conditioning unit during summer months. With the proper installation under a roof of this protective material, the desired room temperature can be maintained at much less of an energy cost. Updating this important feature of a roof could be the best money-saving feature added to a building, even though it will be an invisible improvement to almost everyone but the homeowner.

Study More All Around Wide Plank Laminate Flooring

Desire a new search within your residence? Or preserve the oldfashioned appear but nevertheless change the flooring youve acquired? Do you think youre considering time efficiency as well? Then the present laminate products need to catch your eye in terms of flooring. Broad plank laminate flooring presents a lot the same quality because the narrow plank laminate flooring. When buying vast plank laminate flooring you need to consider under consideration the appearance you wish to offer your property around the inside. For that reason examine internet sites or go to home centers which certainly offer vast plank laminate flooring to view regardless of whether the nuances available on the market place match your flavor. The end of either the slim or even the vast plank laminate flooring is what supplies the oldfashioned muchtrafficked or shiny brandnew look you would like.

You could also be considering the top quality of this kind of flooring. Some say the extensive plank laminate flooring is much better than narrow plank laminate flooring but right after all it merely will get right down to who installs it and the way rapidly they do it. Naturally the new locking system which has taken gluing from the image together together with the width allow it to be twice easier and faster to put in for that reason much less timeconsuming in your case and less costly for the pocket. The extensive plank laminate flooring suppliers also supply a specific guarantee so you should get that variety of wide plank laminate flooring which has the longest guarantee allow us say somewhere in between 10 and 15 a long time. Moreover ensure that you just pick that kind of wide plank laminate flooring which is water resistant not only to your rest room but additionally for your other rooms. You by no means know when you might have allthumbs guests all around or when your child forgets the h2o working.

In case you nevertheless wish to sustain the look with the slim plank floor and reduce the quantity of time for installing it then get vast plank laminate flooring that preserves by way of its finish and texture the glimpse of your slim plank pattern you might have in head. It is simple to fool the eye and if you want your eye fooled be sure suppliers have previously considered about it. If a picture on an online site is not convincing adequate then purchase a sample of the wide plank laminate floor which has drawn your interest. In case you are nevertheless not convinced then log on world wide web forums and see what other folks need to say concerning the narrow or even the broad plank laminate flooring. Goodluck in creating your option

Save Money With Display Furniture

When looking for new furniture, you may find that the best deals are literally right before your eyes. Most furniture stores sell their display furniture at incredible prices- and being at the right place at the right time could mean slashing as much as 90% off the costs of your furniture. Display models are usually set up for customers to see, touch, and feel the furniture choices before them. These pieces can include furniture for the entire home, including sofas, beds, dressers, kitchen tables, and more. Often companies use displays for a few weeks to a few months, then sell it at reduced costs to make way for the new displays, passing on tremendous savings your way.

Keep in mind that because this furniture has already been put together and sit out, there may be small scratches, dents, or other slight damage, however, for those who don’t mind barely noticeable marks, the deals are undeniable. The damage, if any, is very minimal, and most of the time not something even seen without a search. A few dents and dings for hundreds to thousands of extra dollars…priceless.

In order to find out if a display model is for sale, or when it will become available for sale, all you need to do is ask a furniture sales associate. They will be glad to give this information, which will also give you a heads up as to when to be back to the store when it is being sold.

Think about whether you could pay for someone to fix or clean any problems with the display furniture. The best deals will be on furniture that has some kind of damage, but if you are receiving a significant discount, then you may find it will be worth your while to go for the more damaged article.

Speak with the owners of shops to let them know you are only in the market for a real bargain. Ask them when their display furniture will be up for grabs to contact you. Then they will be on the lookout for a bargain for you, and saves you going back time and again.

Buying display furniture is a smart move that anyone can make. No one will even know that it was a display model other than you and your family, and with such amazing prices for the pieces, you would be crazy not to take advantage of the offers.

Ifloor Types Of Wood Flooring Underlayment

Underlayment is used as a base or substrate to make the top flooring more durable and smooth. There are many types of wood flooring underlayment. iFloor, the first e-commerce discount flooring store website, shares us some information about the types of floor underlayment.

Wood flooring underlayments are categorized into different types. These types differ from each other when it comes to properties and usage. Specific types are used for specific flooring finish to ensure desired results. Here is the most common wood flooring underlayments used:

Oriented Strand Board Often referred to as OSB, it is one of the most natural and economical types of wood flooring underlayment. The materials used are engineered wood products which came from small-diameter and fast growing trees that are easily replaced. This floor underlayment is inexpensive compared to other types. It is easily and directly installed by the use of glue or nails.

Plywood Plywood is another engineered wood product. Cross laminated wood veneers are pressed together and left under a high level of heat to produce ply wood. Plywood can serve as an alternative to Oriented Strand Board. They are both easily installed by gluing or nailing them directly to the subfloor.

Advantech If you want the characteristics of Oriented Strand Board or plywood but want it much durable, you can go with Advantech. This type is similar to the previous ones except that it has a waterproof coating and a unique tongue and grove design. These characteristics prevent the wood from swelling. It is also directly installed by the use of glue or nails.

Concrete This type of wood flooring underlayment is recommended for direct adherence of wood flooring using a eood floor glue. Aside from being a wood flooring underlayment, concrete may also be used as a subfloor.

Felt Paper Also called as Tar Paper, Felt Paper wood floor underlayment is used for wood subfloors with overlapping fashion. It keeps moisture from entering the subfloors which may cause damage. It is also preferred to correct minimal flooring imperfections. This type is best when wood flooring will be nailed into the wood substrate. Felt paper underlayment is usually available in rolls of 15 or 30.

Standard Foam Underlayment This type of wood flooring underlayment is known for its noise-dampening quality. It is a 1/8 inch padding of a synthetic product made of polyethylene foam. Standard foam underlayment is recommended when using floating flooring products or flooring installed without the use of nails or just minimal glue.

Foam and Film Combination Underlayment This type of underlayment is just a standard foam but with moisture preventing capacity. It prevents moisture from getting in contact with the wood subfloor which may damage it by having a barrier. The barrier is made of an additional layer of film.

These are the most common types of wood flooring underlayment. They provide better top flooring look and durability. Get only the best underlayments by visiting iFloor.

Oak Flooring From Oxford Specialists To Add Class To Your Commercial Premises.

Each business has an image that it looks to project and this should be carefully considered when decorating its premises. Many businesses such as shops, restaurants and hotels opt for carpet tiles or vinyl, but if you are looking to create a high-class finish that reflects your companies image consider natural oak wood flooring.

There are suppliers that offer oak flooring Oxford which could add value to your property, alongside other flooring types such as carpets. It is also a material that is beneficial for businesses as it is easily maintained and can be cleaned with little fuss at the end of the night.

The wooden flooring that they offer is produced by two top manufacturers, Junckers and Boen; Junckers create durable wooden flooring that will stand the test of time, it is available in a variety of colours and styles making it suitable for a wide range of premises. For sports halls and leisure centres they supply safe flooring suitable for many different activities.

Boen flooring tackles a selection of problems that can occur in commercial properties such as humid or dry climates and issues surrounding sound. They too supply commercial and sports flooring that can be laid easily on top of existing wooden flooring or concrete.

Contrary to some of the other options available, wooden flooring is highly durable making it suitable for commercial businesses and offices with a high traffic flow. However, should your existing wooden flooring need restoring to its original state, these specialists offer a variety of repair services to help.

If you are adding the finishing touches to your businesses premises and need a floor covering to reflect its quality image to your clients, contact an oak flooring specialist in the Oxford area.